SARAVEL
CORP. recently delivered two Hot Air Furnace Units equipped with
Weishaupt dual fuel burners to IRAN KHODRO DIESEL, the leading bus manufacturer in Iran.
The
Hot Air Furnace Units are installed to preheat the air delivered
to the bus spray cabin.
Completed
unit prior delivery to the site
Engineering
specification is as follows:
Model
: SAF-G-P-I-2-h
Air
Flow Rate : 25500 m3/hr (15000 CFM)
Minimum Outdoor Air flow Rate : 2550 m3/hr (1500 CFM)
Allowable
working temperature : 200 °C
Weight : 4000 kg
Outlet
temperature: 180 °C
Heating Capacity: 585 KW (2,000,000 BTU/hr)
Maximum
eternal pressure: 250 Pa (1inch wg.)
Burner Capacity: 732 KW (2,500,000 BTU/hr)
Fan
Type: Centrifugal Air foil 300 SWSI
Shaft Diameter: 70 mm
Speed: 1300
RPM
Motor Speed: 2800 RPM
Belt
Type: B No of Belt: 3
Motor Power: 15 KW (20HP)
Bearing
Lubricant: OKS 424 (DIN 51 502)
Starting time: 20 sec
Motor
current: 28 Amp.
No of phase: 3/50 Hz
Voltage: 380 ± 10%
Inside
of the unit
Rev : 2.00
SARAVEL reserves the right to discontinue or change at anytime, specifications
or designs without notice and without incurring obligations.